![]() IMPORTANT Do not connect the USB cable until after the software is installed. To prepare your machine for use, please follow these Easy Setup Instructions before referring to any other documentation. Thank you for purchasing the Canon PIXMA MP180/MP160. If you are connecting the machine to a computer for use, see the reverse side for instructions on installing the software. Ensure the paper stack does not exceed the Load Limit Mark (A).ģ Pinch and adjust the Paper Guide (3) to the width of the stack. IMPORTANT Wait until the preparatory operation is complete this takes about one to two minutes.ġ Open the Paper Support (1) and pull up the Paper Support Extension (2) until it stops.Ģ Load the paper with the print side face up. Lift the Scanning Unit to put the Scanning Unit Support back to its original position. You will need this to register the product.Ĥ Close the Scanning Unit. IMPORTANT (US only) Write down the serial number. If you have an undesired language selection, refer to the Users Guide.ġ Lift the Scanning Unit and pull the Scanning Unit Support down into place. The language setting is only available for some countries. 2 Press to turnģ Use or on the Operation Panel to select the language on the LCD, then press. Do not lift the machine by grasping the Paper Support Extension or the Operation Panel.ġ Connect the power cord. ![]() 5 Open the Scanning Unit and remove the protective material (A).īe sure to hold the machine by the side. 4 Remove all shipping tape and the protective sheet. 1 Carefully remove all items from the box.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |